TOUCH-ON, a pressure washer, pump-sprayer or bucket applied durable hydrophobic ceramic paint protection treatment that additionally has low-foaming, powerful detergency for most second stage bucket washes so that you can further clean the paint while simultaneously applying protection following TOUCH-LESS cleaning.

Once applied, TOUCH-ON has dirt releasing properties too that works in conjunction with TOUCH-LESS in subsequent wash routines to produce superior contactless results.

Packed in one dose sized 30ml sachets apply no more than 1 time per month.

 TOUCH-ON is water-based, not flammable nor contains alcohol or petrochemical solvents.

Quick guide

• pH ~12
• No caustic soda
• No phosphates
• No solvents
• No NTA
• Bio-degradable

How to use Bilt Hamber TOUCH-On

Vehicle must be cool and out of direct sunlight. Pre-wash with TOUCH-LESS cleaner to remove dirt or contamination on your paintwork.

Pressure Washer

Add 30ml into your foam gun reservoir, top up to 300ml with clean cool water. Shake well and apply under pressure to entire vehicle. Immediately rinse using pressure washer. Dry vehicle with a microfibre towel or similar. Alternatively, an air
blower can be used.

Bucket

Pour 1 to 2 sachets into a bucket then fill with 10 litres of warm water (preferably from a fast running tap) and mix well. Apply using your preferred wash mitt and rinse with clean water. Dry vehicle with a microfibre towel or similar. Alternatively, an air
blower can be used. Please note, this is not a high foaming bucket wash.

Trigger sprayer

Add 30ml to trigger bottle and top up to 1 litre with (preferably demineralised/deionised) water. Shake well. Trigger apply liberally, panel by panel, then thoroughly rinse with pressure washer or hose. Dry with microfibre towel or air blower.

Note: We do not recommend applying more than once a month. The car must not be allowed to air dry as water spotting may occur.

Safety Data Sheet